Videx VX2200 User Manual download pdf (Page 6)

DOOR PANEL CONNECTIONS

Not all the cables shown below will be required for every installation. Cables that will be

required in every installation are the bus connections and the power supply connections. The

busy connection will only be required on multiple door systems. The rest are self explanatory.

The cables shown coming from the right of the door panel will all run back to the CPU. The

cables shown coming from the left of the panel are local to that door.

Note: The panel shown is only for example. Your chosen panel may differ from the style

shown but will have the same cable requirements.

NOTES:

* Out of the five cores, two must be a twisted pair (V1 & V2 which are the video signal pair).

** Two additional cores are required to the lock release if door monitoring is used.

1. Bus connections are always required.

2. Power supply connections are always required.

3. Trade connections are only required when a trade button is to be used.

4. Video connections are only required on video systems (Cables shown are for non-coax video).

5. Vprox or Xprox prox reader connections are only required when proximity access control are included on the

door panel (The Xprox reader cables must be screened).

6. Busy signal connection is only required on multiple door and two level systems.

7. External lock trigger signal input is required when an external source is used to trigger the lock output on the

door panel. (For example, in conjunction with a proximity access control system).

8. Lock release connections may be different if used in conjunction with a proximity access control system (i.e.

the lock release connected directly to the proximity system).

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Videx VX2200 User Manual Page 6