1 of 19 ART380 TELEPHONE INTERFACE MANUAL Installation and programming manual Version 1.6 07/200
10 of 19 1. Switch off the power to the Art380 2. Short terminals - & SK 3. Switch on the power to the Art380 4. Remove the short betwee
11 of 19 Using auxiliary outputs: • To activate auxiliary 1 (A1) during a call simply press 5. If the auxiliary output is set to latch then it
12 of 19 Divert call setup The divert facility allow a call to be diverted to another telephone number. When in divert mode it is recomme
13 of 19 Access code setup The access code is used to restrict access to the programming menu and commands. It can be disabled, setup for both l
14 of 19 User commands The following commands can be used to activate functions of the Art380. Note: If the code facility is active, this will b
15 of 19 NOTE: WE RECOMMEND LOCKING THE PROGRAMMING ONCE IT IS COMPLETE TO AVOID THE USER ACCIDENTALLY CHANGING ANY SETTINGS. TO DO THIS, PICK U
2 of 19 CONTENTS DESCRIPTION PAGE Introduction ------------------------------------------------- 3 Mounting Instructions -----------------
3 of 19 Introduction The Art380 is a self contained telephone interface module for use on an analogue telephone line. Its primary function is t
4 of 19 terminals inside). The ART380 telephone interface unit is supplied with a BT style plug. For more information, see relevant paper work s
5 of 19 Wiring directions Please follow the appropriate wiring diagram from one of the pages at the rear of this manual. For information purpose
6 of 19 L1 Telephone line input Can be used as an alternative connection to the RJ11 socket. L2 Telephone line input Can be used as an alter
7 of 19 Cable size and type When running cables for any intercom system, these cables must be installed separately from the mains cables. All mu
8 of 19 understood and so is required to be entered again. If during the programming, a mistake is made, simple hang up the telephone and start
9 of 19 Number of rings ** 21 X X = 0 to 9 (0 = 10 rings, 1 – 9 = number of rings) 6 Door open time ** 22 X X = 0 to 9 (0 = 1 second, 1 – 9 mul
Comments to this Manuals